Boating Basics: Before Going Out

• Vessel Length Classes
• Vessel Capacity

Before going out on the water, take steps to make the outing safe and enjoyable.

Vessel Length Classes

• A vessel’s length class determines the equipment necessary to comply with federal and state laws.
• Vessels are divided into length classes:
  • Less than 16 feet
  • 16 feet to less than 26 feet
  • 26 feet to less than 40 feet
  • 40 feet to less than 65 feet
• Length is measured from the tip of the bow in a straight line to the stern. This does not include outboard motors, brackets, rudders, bow attachments, or swim platforms and ladders that are not a molded part of the hull.

Measuring Vessel Length

Vessel Capacity

• Always check the capacity plate, which is usually found near the operator’s position or on the vessel’s transom. This plate indicates the maximum weight capacity and maximum number of people that the vessel can carry safely.
• If no capacity plate is available, the number of persons is found by multiplying the boat length times its width and then dividing that number by 15. (BAR 18.17.2 NMAC 11.D)
• PWCs and some other vessels are not required to have a capacity plate. Always follow the recommended capacity in the owner’s manual and on the manufacturer’s warning decal.