The following course material is for reference only. Please go to the new course to complete your Alabama certification.

Chapter 1: Know Your Boat
Types of Boat Hulls

There are two basic types of boat hulls – Body of a vessel; basic structure or shell—displacement and planing.

Displacement Hulls

Boats with displacement hulls move through the water by pushing the water aside and are designed to cut through the water with very little propulsion.

• If you lower a boat into the water, some of the water moves out of the way to adjust for the boat. If you could weigh that displaced water, you would find it equals the weight of the boat. That weight is the boat's displacement.
• Boats with displacement hulls are limited to slower speeds.
• A round-bottomed hull shape acts as a displacement hull. Most large cruisers and most sailboats have displacement hulls, allowing them to travel more smoothly through the water.

How Planing Hulls Operate

	Displacement Mode—A planing hull, when operated at very slow speeds, will cut through the water like a displacement hull.
	Plowing Mode—As speed increases, a planing hull will have a raised bow, reducing the operator's vision and throwing a very large wake. Avoid maintaining a speed that puts your boat in plowing mode.
	Planing Mode—Your boat is in planing mode when enough power is applied so that the hull glides on top of the water. Different boats reach planing mode at different speeds.

Planing Hulls

Boats with planing hulls are designed to rise up and glide on top of the water when enough power is supplied. These boats may operate like displacement hulls when at rest or at slow speeds but climb towards the surface of the water as they move faster.

• Boats with planing hulls can skim along at high speed, riding almost on top of the water rather than pushing it aside.
• Flat-bottomed and vee-bottomed hull shapes act as planing hulls. Most small power-driven vessels, including personal watercraft (PWCs)– A small vessel that uses an inboard jet drive as its primary source of propulsion, and is designed to be operated by a person or persons sitting, standing, or kneeling on the vessel rather than inside the vessel, and some small sailboats have planing hulls, allowing them to travel more rapidly across the water.

Descriptions of Hull Types

Hull Shapes	Hull Illustrations	Advantages	Disadvantages
Flat Bottom Hull		This planing hull has a shallow draft, which is good for fishing in small lakes and rivers.	Rides roughly in choppy waters.
Deep Vee Hull		This planing hull gives a smoother ride than a flat bottom hull in rough water.	Takes more power to move at the same speed as flat bottom hulls. May roll or bank in sharp turns.
Round Bottom Hull		This typical displacement hull moves easily through the water even at slow speeds.	Has a tendency to roll unless it has a deep keel or stabilizers.
Multi-Hull		Another example of a displacement hull, the multi-hull has greater stability because of its wide beam.	Needs a large area when turning.