All vessels are required to have at least one Type B-I fire extinguisher(s) on board if one or more of the following conditions exist:
Use this chart to determine the size and quantity required for
your vessel.
| Fire Extinguisher Requirements |
Classification
type & size |
Foam
minimum gallons |
Carbon Dioxide
minimum pounds |
Dry Chemical
minimum pounds |
| B-I |
1 1/4
|
4 |
2 |
| B-II |
2 1/2 |
15 |
10 |
| Length of Vessel |
Without Fixed System |
With Fixed System* |
| Less than 26 ft. |
one B-I |
one B-I |
| 26 ft. to less than 40 ft. |
two B-I or one
B-II |
one B-I |
| 40 ft. to less than 65 ft. |
three B-I or one
B-II and one B-I |
two B-I or one
B-II |
|
* Refers to a permanently installed
fire extinguisher system
|
Approved types of fire extinguishers are identified by the following
marking on the label—"Marine Type USCG Approved"—followed
by the type and size symbols and the approval number.
Extinguishers should be placed in an accessible area—not
near the engine or in a compartment, but where they can be reached
immediately. Be sure you know how to operate them, and inspect
extinguishers regularly to ensure they are in working condition
and fully charged.
Check the charge level of your fire extinguishers regularly. Replace
them immediately if they are not fully charged.