About the Study Guide

You are looking at a preview of what’s in the timed Kentucky Boat Ed Course. Feel free to look around, but you’ll need to register to begin progress toward getting your Kentucky Boater Education Certificate.

Learn More Register for the Course

Pre-departure check of a boat before launching

Keeping your boat well-maintained will extend its life and give you and your family many more years of enjoyment.

  • Examine the interior and exterior of the hull when it is out of the water.
    • Check for oxidation, a common problem on aluminum hulls, that appears as white powder spots. Use fine sandpaper on oxidized areas until spots are replaced by bright shiny metal.
    • To protect the environment, use only environmentally safe, non-phosphate detergents to remove oil and algae from fiberglass hulls. Avoid abrasive materials, which can remove the shiny top layer (gel coat). Patch holes immediately with a fiberglass patching compound.
    • Check through-hull fittings to make sure they are not cracked or leaking.
    • Remove all puddles from the interior before and after every outing.
  • Store boats in a dry area out of the sun. If you must store the boat for a long period of time, place the trailer on blocks to preserve the tires. Keep the boat covered, leaving an opening to circulate air. Hang canoes upside down.
  • Clean all lines (ropes). Dirt and sand cause deterioration. Keep lines out of the sun when not in use, and replace weakened or fraying lines.
  • Clean sails with a soft brush. Examine them for small tears or open seams that can be repaired by taping or sewing.
  • Refer to the owner's manual for a maintenance schedule.