Retrieving Your Boat Onto a Trailer
Back the trailer into the water so that approximately two-thirds of the rollers or bunks are submerged in the water. Set the parking brake of the towing vehicle, and put it in park (or first gear if you have a manual transmission).
- Move the boat onto the trailer far enough to attach the winch line to the bow eye of the boat. Finish pulling the boat onto the trailer by cranking the winch. Stay out of the way of the direct line of the winch cable in case it snaps or you lose control of the winch. Do not load a boat using engine power because this can cause damage.
- Shut off the engine, and raise the engine or outdrive.
- Pull the boat out of the water.
Prepare for the drive home well away from the boat ramp so that you don't block ramp traffic.
- While still at the ramp area, remove and dispose of all weeds from the boat and trailer, remove the drain plug to release bilge water, and drain any live wells. This will help prevent the spread of aquatic nuisance plants and animals.
- Secure the boat on the trailer and the gear within the boat, following the same instructions listed above under "Before Leaving Home."